Browse Month: March 2019

What is Baling Wire Made of

If you happen to use baling wire for your personal business or the company you work in, then you may wonder what it’s made of. There are different types of baling wire made of a range of materials. The type you choose is heavily dependent on what it will be used for. You should know that all wire is a form of metal that has been stretched or drawn to the desired diameter. If you keep reading, you’ll discover what exactly baling wire is made of. For the most part, baling wire is typically made of either iron or steel. They also come galvanized or annealed which you’ll read more about below.

Galvanized Baling Wire

For those who aren’t aware, galvanized bale wire has an additional coat added to the wire. Usually, this coating is a protective material such as zinc so that the wire has resistance to both corrosion and rust.

Galvanized wire has multiple purposes, but you’re most likely to see it being used in the packaging, recycling, or waste management industries. Ultimately, any industry that helps to take materials from the begging of their lives up until the end is likely to use such baling wire.

How is it Made?

In case you’re wondering how galvanized wire is made, it is usually submerged into a hot bath of zinc or zinc oxide so that the two metals can bond. Zinc is chosen because it’s known to resist corrosion from both oxygen and moisture. It should also interest you to know that zinc is scratch resistant making galvanized metals capable of lasting for long periods of time.

Annealed Baling Wire

Annealed baling wire happens to be one of the most popular because of how durable and flexible it is. Some specific benefits of annealed wire are that it’s much more flexible as well as easier to work with. It happens to be one of the most popular in the recycling industry because it’s less tedious for employees to use.

You can also rest assured that annealed wire is produced to endure pressure as well as resist any environmental conditions. This makes it most suitable for use in the recycling industry especially.

How’s it Made?

What makes annealed bale wire different is that it goes through an annealed process in which the wire is heated and then slowly cooled. This changes the microstructure of the wire so that it brings about more positive results.

Most of the time, the underlying material is steel, and the steel is galvanized for extra resilience.  You may also find that black annealed wires have a thin coating of light oil on it so that it passes through the baling machine easily. For these ones, the wires are dipped into the oil until they’re evenly coated and then coiled and packed away.

It is good to have an understanding of the materials that you’re using and what they’re made of. In doing so, you may have a better idea of how best to use them in your chosen capacity.

How to Tighten Baling Wire

There are multiple uses for baling wire, but one of the most popular is for recycling purposes. It is often used to bundle up and compress cardboard waste amongst other materials. With that being said if you happen to be one of the people that have to use baling wire, you might be trying to figure out how you can tighten it so that it compresses your materials securely. You should know that it isn’t such a complex process, but it is one that requires the right tools. In light of this, continue reading to find out the best ways to go about tightening baling wire.

Get the Right Tools

Before you can tighten the baling wire, you’re going to need to start by getting the right tools. There is a number that you can use to make your life easier, and here are a few.

Wire Cutters: One tool that you’re going to need is a wire cutter in order to grab as well as cut sections of wire. The cutter handles are twisted in order to tie the wires together.

Pliers: Aside from wire cutters, another common tool that’s used to tighten baling wire are pliers. As you probably already know, they come in a range of shapes and sizes, but ones made specifically for baling wire are stubby and have flat jaws so that they’re able to grab and maintain pressure on the wires.

Hooks: In addition to the mentioned, hooks are another tool that you should add to your list. The reason you need this is solely to help you twist. In terms of what it looks like, it’s a short bent piece of metal that’s typically on a long handle.

Tie Tools: If you happen to be dealing with gauge baling wire, then you should use tie tools. They’re used to achieve a tight twist on bails of recycled paper as well as aluminum.

How to Tighten Baling wire

To tie baling wire, you should take a hook, wrap the wire around it and spin the handle to twist the wire in a loop. You then take the free end, pull it through the loop and wrap it around itself to tighten the hold wire.

You could also use pliers to tighten the baling wire, but hooks are effective if you want to quickly twist sections of wire without the need for what can be bulky plier handles.

Another way to tighten baling wire would be to use tie tools which have been listed above as one of the tools to tighten baling wire. To use this, take two sections of wire and then insert them through an opening located on the tool and then crank the rotating handle to twist the selected sections. If you want a highly secure connection, this is an ideal tool to use as once tied; they are extremely difficult to remove.

To tighten bales, all it usually requires is that you use the right tools to twist them together securely. The tighter they are, the more secure your materials are likely to be. This also gives you peace of mind as you should be more confident that your materials can be shipped safely and securely to its destination.